UNITED STATES
Allemagne
Autriche
Belgique
Bulgaria
Croatia
Cyprus
Czech Republic
Denmark
Estonia
Finland
France (Métropolitaine)
Greece
Hungary
Italy
Latvia
Liechtenstein
Lithuania
Luxemburg
Malta
Pays-Bas
Pologne
Portugal
Romania
Slovakia
Slovenia
Spain
Suisse
Statut en temps réel de votre commande et de votre livraison.
Impact protection bollards equip areas where forklifts, pallet trucks and handling vehicles operate, with the aim of protecting structures, racking and equipment from repeated collisions. This range is aimed at logistics warehouses, industrial workshops, car parks and loading areas that need to protect sensitive points: building corners, racking uprights, dock doors or technical equipment exposed to vehicle traffic. Available in steel or a semi-rigid shock-absorbing material, these bollards absorb the impact of a low-speed collision and limit both material damage and the operational downtime it causes. The choice of model depends on traffic intensity, floor type and the level of protection required.
In a warehouse, steel protection bollards are positioned at the points most exposed to repeated forklift traffic: racking corners, mezzanine supports, sectional doors and narrow traffic lanes. They absorb low-speed impacts that, repeated over several months, would otherwise weaken a metal structure or deform loaded racking. Their presence also reduces the frequency of maintenance work caused by unreported impacts.
Around loading docks and parking areas, these bollards mark out vehicle paths and visually flag zones that should not be crossed. Positioned around the edge of a manoeuvring area, they reduce the risk of collision between a manoeuvring vehicle and a fixed part of the building, while clearly marking traffic limits for drivers.
The round model spreads impact evenly around its full circumference, an advantage in two-way traffic areas where a collision could come from several angles. The square steel bollard on a base plate, on the other hand, offers better visual clarity at a wall or racking corner, where its shape naturally follows the line of the structure being protected. The choice between the two formats therefore depends more on the site layout than on any difference in mechanical performance.
Most models are fixed to the ground with a bolted base plate, a solution that guarantees good impact resistance while allowing quick replacement after a heavy collision. This fixing works equally well on a warehouse concrete floor or an outdoor tarmac surface, provided the anchoring is sufficient to prevent tipping in the event of a head-on impact.
Beyond their mechanical role, these bollards act as visual markers, clearly flagging sensitive areas for forklift drivers and pedestrians on site. Good visibility, combined with strong contrast against the surroundings, reduces the risk of collisions caused by a lack of anticipation, particularly in aisles where visibility is reduced by high-level storage.
Our range includes several models of protection posts adapted to different levels of risk. Steel posts provide excellent strength for areas subject to high stress, while polyurethane models provide flexible, visible protection in industrial environments.
Yellow/black, red/white or high visibility finishes immediately alert drivers and operators. Depending on the use, you can choose a round, square, fixed on plate or reinforced post, in order to effectively protect machines, partitions, gates, shelving, pillars or technical access.
These solutions are ideal for limiting costly repairs and providing long-term security to exposed areas.
In a warehouse or workshop, accidents often happen during maneuvers: forklifts, pallet trucks, utility vehicles, moved pallets or narrow passages. A well-positioned protection post allows the danger to be absorbed or signaled before an impact damages an essential structure.
For traffic areas, choose highly visible posts in order to channel routes. To protect a machine or rack, install posts at potential impact points. For platforms, doors and corners of buildings, opt for robust models fixed to the ground.
A clear layout improves worker safety, protects equipment and strengthens the overall organization of the site.
A steel protection post in galvanized steel safeguards sensitive areas against impacts from handling equipment in warehouses, workshops, car parks and loading docks. Built from Ø60, 76 or 102 mm tube and standing 800 to 1200 mm high, it reliably protects racking, machines, sectional doors, columns and pedestrian walkways. Its bolt-down baseplate absorbs the energy of a forklift impact. The yellow RAL 1023 powder-coat finish ensures maximum visibility and delivers a lasting reduction in repair costs caused by collisions throughout industrial and logistics environments.
Install protection posts anywhere an impact could cause damage: in front of a sectional door, around a machine, at the ends of racking, along a traffic lane, near a loading dock or around a column. Models in Ø76 or 102 mm tube, 1000 to 1200 mm high, belong at corners and intersections where forklifts operate. Secured with a bolt-down baseplate and dowels into a concrete slab, they protect pedestrians and sensitive structures while clearly marking risk zones thanks to their yellow RAL 1023 finish. Position them with enough clearance to absorb a glancing impact.
The round post, in Ø60 to 102 mm tube, spreads impact energy around its full circumference and deflects vehicles: ideal for protecting doors, machines, corners and passageways. The square post offers a stronger visual presence and greater rigidity, suited to industrial areas where physical signage must be highly visible. Both are made of galvanized steel with a yellow RAL 1023 powder-coat and fixed with a bolt-down baseplate. The choice depends on the environment, the available space and the level of protection required against forklift trucks and other handling equipment.
The yellow-and-black contrast boosts the post's visibility and clearly flags a risk zone, even in a cluttered or poorly lit warehouse. This combination instantly draws the attention of forklift, pallet-truck and utility-vehicle drivers, reducing dangerous manoeuvres. The yellow RAL 1023, applied by powder-coating over galvanized steel, resists UV, abrasion and repeated impacts to deliver lasting signalling. The black bands, often retroreflective, further sharpen recognition along traffic lanes and critical corners, making the post stand out from the surrounding industrial environment at a glance.
Yes, protection posts are perfectly suited to logistics warehouses. In Ø76 or 102 mm galvanized steel tube with a yellow RAL 1023 powder-coat, they protect racking, machines, loading docks, technical access points and traffic corners where forklifts operate. Fixed with a bolt-down baseplate onto a concrete slab, they withstand the repeated impacts of intensive handling. Their installation noticeably reduces collision risks and repair costs while safeguarding pedestrian flows. At 1000 to 1200 mm high, they provide lasting physical demarcation of the sensitive zones across a logistics site.
Most protection posts are fixed to the floor using a welded baseplate and anchor bolts or dowels matched to the substrate. The fixing must be carried out on a stable surface, typically a concrete slab of sufficient thickness and strength to hold firm in the event of an impact. Mark the position, drill, insert the anchors, then tighten the bolts to the recommended torque. A quality galvanized baseplate, combined with chemical anchoring where needed, ensures that the Ø76 or 102 mm post absorbs a forklift impact without working loose or tearing out of the floor under intensive use.
Industrial protection posts are designed to limit damage from impacts and vehicle manoeuvres. Their resistance depends on the material, the diameter (Ø60, 76 or 102 mm), the height (800 to 1200 mm), the wall thickness, the floor fixing and the force of the impact. A post in thick-walled galvanized steel, anchored with a bolt-down baseplate on a concrete slab, absorbs and deflects the energy of a loaded forklift truck. For heavily exposed areas, choose robust large-diameter or reinforced models capable of taking repeated collisions without breaking or tearing loose from the floor under intensive warehouse use.
Yes, racking is especially exposed to impacts in warehouses and storage areas, particularly at aisle ends where forklifts operate. Installing protection posts in galvanized steel, Ø76 or 102 mm tube and 800 to 1200 mm high, near the rack ends limits direct hits to the uprights and beams. Bolted down by baseplate onto a concrete slab and powder-coated yellow RAL 1023, they protect the racking structure and reduce the risk of partial collapse. This protection preserves storage stability and operator safety while avoiding costly repairs and the disruption of replacing damaged frames mid-operation.
Can't find the answer to your question ?
Protection posts are essential equipment for securing professional environments exposed to shocks, the passage of handling equipment and the risk of collision. In a warehouse, a workshop, a covered parking lot, a production area or a loading dock, they can effectively protect walls, machines, shelving, doors, building corners and traffic areas.
Installed in strategic locations, protection posts reduce the risk of property damage and help improve worker safety. They are used to create a clear separation between vehicles, pedestrians, sensitive equipment and building infrastructure. Their role is simple: absorb, report or prevent impacts before they cause costly repairs or business interruptions.
Accidents in industrial environments often occur during maneuvers: forklifts, pallet trucks, utility vehicles, moved pallets, narrow storage areas or crossings between pedestrians and machinery. Even at low speed, an impact against a machine, a sectional door or a rack can cause significant damage.
An industrial protection post helps secure these risk areas by creating a visible physical barrier. It helps drivers to better identify obstacles, protects fixed installations and reinforces the general organization of the site. It is a simple, durable and effective solution to limit incidents in intensive work spaces.
Depending on the configuration of your building, several types of posts can be used. Round steel posts are particularly suitable for protecting accesses, doors, machines and traffic corners. The square steel posts offer a strong visual presence and are suitable for areas where protection must be clearly identifiable.
Models with yellow/black or red/white finishes improve visibility in industrial environments. These safety colors quickly attract the attention of operators and machine drivers. For highly exposed areas, the posts fixed on the plate ensure a stable and durable installation on the ground.
Protective posts are often installed in front of production machines, electrical panels, conveyors, storage racks, sectional doors, platforms, pillars or interior facades. They create a buffer zone between the equipment to be protected and moving vehicles.
In a logistics warehouse, they can also be used to structure flows: separating traffic lanes, protecting pedestrian walkways, securing loading areas or demarcating reserved spaces. Well positioned, they contribute as much to safety as to the readability of the space.
An impact against an industrial door, a machine or a rack can quickly generate significant costs: repair of the building, replacement of equipment, production stoppage, immobilization of an area, technical intervention or risk for personnel. Installing protection posts helps anticipate these problems and reduce accident-related costs.
For businesses, administrations, workshops, factories, logistics platforms and professional car parks, this equipment represents a profitable preventive investment. They protect existing infrastructure and help maintain a safer and better organized working environment.
Protective posts can be installed in many professional environments:
The choice depends mainly on the level of risk, the type of possible impact and the location to be protected. For an occasional traffic area, a sturdy sign post may be sufficient. For an area exposed to forklifts or frequent maneuvers, it is preferable to opt for a steel model, clearly visible and firmly fixed to the ground.
The height, diameter, shape, finish and fixing system must be chosen based on actual use. A tall post will be more visible in a traffic area, while a more massive model will be better suited to protecting a machine or an exposed corner. Versions with contrasting stripes improve the perception of danger, even in busy spaces.
In workshops and warehouses, coexistence between pedestrians and handling equipment requires clear organization. Protective posts can be combined with barriers, guardrails or ground markings to create secure pedestrian paths. They make it possible to physically mark the limits between the movement zones of people and the zones reserved for vehicles.
This visual and physical separation improves daily safety, particularly in areas where forklifts circulate regularly. It helps operators stick to planned routes and reduces the risk of accidents at crossing points.
The protection posts offered by Stand-Direct are designed to meet the needs of professional environments. Their robust design, good visibility and simple installation make them solutions suitable for intensive use. They are suitable for industrial buildings as well as commercial areas, warehouses, workshops, car parks, reserves or technical spaces.
By integrating protection posts into your layout, you improve the security of your site, protect your equipment and facilitate daily traffic. It is a reliable solution to prevent shocks, secure sensitive areas and strengthen the overall protection of your infrastructure.
Active filters:
